The community has become increasingly aware of the importance of reforestation and food fulfillment. Even so, some of them are still hampered by problems with planting land. However, these obstacles can be overcome by utilizing urban farming using hydroponics. Planting with a hydroponic system used to be considered difficult and required a large initial capital. Now, there is a simple hydroponic system using a wick that can be practiced at home even by ordinary people. The materials and supplies for starting hydroponics are also easy to find in both agricultural and online stores. Through this article, I would like to share information on what equipment you must have to start simple hydroponics at home using the best hydroponic system.
LAPOND Hydroponic Grow Kit
By using a method that has the basic concept of planting the roots of the plant, it grows on the part of the nutrient layer that is not deep and maintains its circulation so that the plant still gets good and sufficient nutrients, oxygen, and water. Hydroponics is famous for its ease of growing vegetables. As a beginner who has never studied agriculture at all, you don’t need to worry because hydroponics is very easy to apply by anyone.
|3 Stage – Hydroponics Reverse Osmosis Water Filtration System||-Designed to make sure your plants receive the purest water for healthy plant growth
-Stages : 1st Stage Sediment Filter, 2nd Stage Carbon Block, 3rd Stage Reverse Osmosis Membrane
-1st Stage: Sediment Filter
-2nd Stage: Coconut Carbon Block
-3rd Stage: 75 GPD Reverse Osmosis Membrane
|AeroGarden Black Harvest Indoor Hydroponic Garden||-Includes gourmet herb seed kit (6 pod)
-Plant to plate
-Easy to use
-Led grow lights
-In home garden system
|Air Tight Inflatable Indoor Outdoor||-Size: 14x10x8ft.
-Country/Region Of Manufacture:China
Pros And Cons Indoor Organic Hydroponics
- Small and compact design is easy to install in almost any location
- 3-stage filtration system removes 98% of water contaminants, including chlorine
- Most affordable reverse osmosis filtration system option available
- Long-lasting filters require little maintenance
- Installation is more involved than many other RO systems in this review
- Not the most comprehensive filtering available
Hydroponic plants are very dependent on the presence of complete nutrients dissolved in water. Therefore, the grower is obliged to keep the nutrients available at all times until the plants are ready to be harvested. The level of nutrients in a hydroponic solution can be measured by a TDS (Total Dissolved Solids) meter. This tool functions to measure the total weight of all solids (minerals, salts, or metals) dissolved in a number of volumes of water. The weight of these solids is expressed in milligrams per liter (mg / l) or parts per million (ppm).
Along with the increase in plant growth, once a week the solution concentration was added to 250 ppm. Since leaf vegetables generally spend 40 days in planting, the concentration of the solution at the end of the planting period is 1,500 ppm. To use this TDS Meter, first, remove the protective cap. Second, turn on the TDS meter. Third, immerse the TDS meter in the nutrient solution to its maximum limit (about 2 inches). Fourth, leave it until the numbers on the screen stabilize. After that, press the hold button to stop the measurement so that the number remains read after the TDS meter is lifted. Don’t forget to dry the TDS meter from the remaining solution after use.